Click on image to zoom

PJ1 FAST BLACK High Temperature Paint 1,500F - Flat Black

16-HIT

PJ1 Fast Black Exhaust System Paint (Product No. 16-HIT) was originally formulated for NASA for use on reentry spacecraft. As a silica-ceramic hybrid, it moves with the metal as it heats/expands and cools/contracts to give it durability. PJ1 Exhaust Paint forms a protective shield against rust and corrosion. It resists chipping and scratching. Temperature Tolerance: Withstands up to 1500F


For Use On: It is well-suited headers and expansion chambers Not for use on engines, crankcases, transmissions, or radiators!
Finish: Flat Black
Application Instructions:
  • Blast etch or sand to expose bare metal.
  • Remove all loose debris.
  • Flush surface with non residue evaporative cleaner such as PJ1 Super Cleaner (Product Number 3-20, 3-21(CA Compliant))
  • Apply paint within 24 hours.
  • Shake can vigorously for a full minute. Apply 3 or 4 thin even coats. Shake can between coats. More thin coats are better than fewer thick coats.
  • Heat Curing On the Vehicle:
  • Run at idle for 10 minutes.
  • Cool for 20 minutes.
  • Run at idle for 20 minutes.
  • Cool for 20 minutes.
Heat Curing Off the Vehicle:
  • Let paint dry completely.
  • Let paint dry completely.
  • Heat to 250F/121C for 30 minutes.
  • Cool for 30 minutes.
  • Heat to 400F/204C for 30 minutes.
  • Cool for 30 minutes. Heat to 650F/343C for 30 minutes.

Description

PJ1 Fast Black Exhaust System Paint (Product No. 16-HIT) was originally formulated for NASA for use on reentry spacecraft. As a silica-ceramic hybrid, it moves with the metal as it heats/expands and cools/contracts to give it durability. PJ1 Exhaust Paint forms a protective shield against rust and corrosion. It resists chipping and scratching. Temperature Tolerance: Withstands up to 1500F


For Use On: It is well-suited headers and expansion chambers Not for use on engines, crankcases, transmissions, or radiators!
Finish: Flat Black
Application Instructions:
  • Blast etch or sand to expose bare metal.
  • Remove all loose debris.
  • Flush surface with non residue evaporative cleaner such as PJ1 Super Cleaner (Product Number 3-20, 3-21(CA Compliant))
  • Apply paint within 24 hours.
  • Shake can vigorously for a full minute. Apply 3 or 4 thin even coats. Shake can between coats. More thin coats are better than fewer thick coats.
  • Heat Curing On the Vehicle:
  • Run at idle for 10 minutes.
  • Cool for 20 minutes.
  • Run at idle for 20 minutes.
  • Cool for 20 minutes.
Heat Curing Off the Vehicle:
  • Let paint dry completely.
  • Let paint dry completely.
  • Heat to 250F/121C for 30 minutes.
  • Cool for 30 minutes.
  • Heat to 400F/204C for 30 minutes.
  • Cool for 30 minutes. Heat to 650F/343C for 30 minutes.

Shipping Information

  • Item Requires Shipping

Documents